Author Topic: Body-enhancing exoskeletons could be stepping into industrial trials next year  (Read 325 times)

Tyler

  • *
  • Deep Thought
  • *********************
  • Posts: 5373
  • Digital Girl
Body-enhancing exoskeletons could be stepping into industrial trials next year
1 December 2015, 10:31 am

  Researchers are developing an exoskeleton prototype that makes it easier to carry heavy loads. Image courtesy of Robo-Mate.Researchers are developing an exoskeleton prototype that makes it easier to carry heavy loads. Image courtesy of Robo-Mate.      by Jon Cartwright

Wearable technology uses electric motors and springs to augment the strength and balance of the human body. It has long been the subject of military research, but now engineers believe the technology is advanced enough to find much broader appeal.

‘We’re getting sufficient power for sufficiently low weight,’ said Jan Veneman, a roboticist at Tecnalia Research and Innovation in Donostia, Spain.

Exoskeletons typically consist of a framework that covers a person’s limbs. The framework has joints alongside the person’s own skeletal joints, and these are powered by motors or springs to assist in strength or endurance.

Exoskeletons with motors are more flexible and more powerful, whereas those with springs can be made much lighter, according Konrad Stadler, an engineer at the Zurich University of Applied Sciences in Switzerland. Stadler is the technical project manager of the Robo-Mate project, and is working on an exoskeleton that could help manual workers. As part of the EU-funded project, he and his colleagues are designing different exoskeleton ‘modules’ to suit the different tasks carried out by manual workers.

In order to help stimulate innovation in manufacturing, the EU has teamed up with industry and academia in public, private partnerships such as the Partnership for Robotics in Europe and Factories of the Future.

Compression forces

‘Musculoskeletal injuries and disorders are caused by lower back compression forces, which result from the load carried and the worker’s own body weight, as well as the posture of the worker,’ says Stadler.

‘Lifting loads with outstretched arms will produce much larger compression forces in the lower back than lifting the same object close to the body.’

By slipping on a Robo-Mate exoskeleton, a worker trying to carry a heavy object with outstretched arms ought to feel more like he or she is carrying it close to the body. Stadler and colleagues are currently testing a prototype in the lab, and hope to be doing industrial tests next year.

Robo-Mate has made a prototype of an exoskeleton. Image courtesy of Robo-Mate.Robo-Mate has made a prototype of an exoskeleton. Image courtesy of Robo-Mate. But exoskeletons are not all about strength. Veneman is investigating whether exoskeletons can also be used to keep people stable as part of the EU-funded BALANCE project.

The human body normally keeps itself balanced with two mechanisms: altering the stiffness of joints, or moving hands and feet to more stable positions. ‘It is very subtle where you place your foot,’ he explained. ‘If you place it too far, or too close, you can easily lose balance.’

The aim of the BALANCE exoskeleton is to learn how the body does this naturally, and see whether the exoskeleton can assist the body to do the same thing. It is currently in the design stage, but Veneman says the prototype should offer minimal resistance to movement, so that it can follow accurately the movements of healthy and infirm people.

Give a push

Once the system understands the human body’s balancing mechanisms sufficiently well, it should be able to replicate it. In theory, you should be able to give someone wearing the BALANCE prototype a push, and the system will move the person’s feet to stop them falling over.

That will require a rather complex exoskeleton with multiple joints, and sensors that can detect instability.

A simpler exoskeleton, and one with a good chance of commercialisation in the near future, is the one being developed within the EU-funded AXO-SUIT project, which is part of the EU’s Active and Assistive Living programme to enhance quality of life for the elderly. The idea behind AXO-SUIT is to help elderly or infirm people perform basic everyday tasks, such as standing up, walking, reaching and grasping.

The technology behind AXO-SUIT is not dissimilar to that in an electric bike, says project lead coordinator Shaoping Bai of Aalborg University in Denmark. Rather than completely taking over, the motors assist action that the user is already trying to perform, such as bending down to water the plants and standing back up again.

AXO-SUIT is currently at the prototype stage. In about five years, however, Bai hopes that his group will have a commercial version costing between EUR 8 000 and EUR 10 000.

That may sound expensive, but Bai believes the exoskeleton could replace a lot of costly personal care for the elderly. ‘It would be helpful for them to maintain their quality of life while staying at home, rather than move to a care centre,’ he said.

More info

 

Source: Robohub

To visit any links mentioned please view the original article, the link is at the top of this post.

 

Welcome

Please login or register.



Login with username, password and session length
3D Printing
by Art (General Chat)
Today at 12:51:23 PM
La-Masterpiece
by LOCKSUIT (Graphics)
Today at 03:06:29 AM
Robot Message in a Bottle
by Freddy (Home Made Robots)
February 22, 2017, 11:30:51 PM
MusicNet
by keghn (General AI Discussion)
February 22, 2017, 11:03:11 PM
The Gynotopian Future (title of this novel?)
by Art (AI in Film and Literature.)
February 21, 2017, 01:26:08 AM
poker a.i
by yotamarker (General AI Discussion)
February 19, 2017, 08:05:35 PM
Beginners topics and resources for AI projects
by 8pla.net (General Project Discussion)
February 19, 2017, 01:51:45 AM
Touch Sensor Line
by keghn (General Project Discussion)
February 18, 2017, 02:42:10 PM
Shell Ocean Discovery XPRIZE: Semi-finalists set sail on a journey to illuminate the ocean
by Tyler (Robotics News)
February 22, 2017, 10:48:25 PM
Drones for good 2.0: How WeRobotics is redefining the use of unmanned systems in developing countries
by Tyler (Robotics News)
February 22, 2017, 04:48:07 PM
At what point should an intelligent machine be considered a person?
by Tyler (Robotics News)
February 22, 2017, 10:48:24 AM
Ocado evaluating robotic manipulation for online shopping orders
by Tyler (Robotics News)
February 21, 2017, 10:50:46 PM
Motor control systems: Bode plots and stability
by Tyler (Robotics News)
February 21, 2017, 04:48:52 PM
Legal artificial intelligence: Can it stand up in a court of law?
by Tyler (Robotics News)
February 21, 2017, 10:49:20 AM
The Drone Center’s Weekly Roundup: 2/20/17
by Tyler (Robotics News)
February 20, 2017, 10:49:50 PM
What we talk about when we talk about robotics
by Tyler (Robotics News)
February 20, 2017, 04:50:09 PM

Users Online

21 Guests, 0 Users

Most Online Today: 44. Most Online Ever: 208 (August 27, 2008, 08:24:30 AM)

Articles