[claude2]

I'm undecided. After the crash, my computer, I also analyzed the importance of iClone, in the installation. Alas, my XP is dead, and I is not the possibility of it back because it's a risk. The new computer, and professional computer, have very powerful system, with extension, which is used, the 3D in all its capacities. I noticed that my HP has many capabilities, but also there's the limit there, and after nombeux work with iClone, this is normal, a stock of accumulated labor, in folders, and multiplied by other work, for the video. I calculated the numbers served, on my drive, with the analyzer, and through, there were 17 gb, busy. I was really scared because it was huge. So, I had emptied, the interface iClone, for it is light, but not impossible to go lower, the gb, and I had to uninstall the program. I'm looking for a lighter program, with similar skills, it exists, but I have to, shop around. But nothing is lost, I kept all the programs, burn to disc. I install all versions of Java 2012 Adobe and Apple. and numerous 3D and flash drive, it is therefore appropriate to receive a 3D program.

[Data]

Odd that iClone is taking so much space on your computer Claude, on the iClone website it says the program requires 2 GIG of space.

Uninstall it, then manually delete the iClone folder and then re-install.

[Art]

With TB (Terrabyte) hard drives costing about $90 / TB (1,000 Megabytes), 17 Gigabytes seems like a minor amount of space.
If it (iClone) is your hobby / something that you really like, then don't worry about the room it takes!
You could even get an external Hard Drive and store ALL your iClone data on it if desired. Memory is relatively cheap...use it!

Just my thoughts....

[claude2]

Art is very nice for your help. Yes, I have some information on the extension, Terrabyte. Here in France, they have several price, 65 €, 120 € ect, then I'll see if it's possible to find, in business, in England, or in the U.S., to make the purchase. I noticed that the computer is able to read an installation, disk, burn, without using the drive, hard drive, computer, giving the lighter use. But, of course, disc burning, are limited in space. It would be impossible to put on disk, engraving, installation complete 'iClone'. Alternatively, install, interface iClone, without, completed, the folder, and take the items and element Jewelry Channel, read the disk burning. But it must be tested, and it is not winning.
Thank you very much my friend.

[claude2]

DataHopa, Thanks for your help, yes, I did a dump of all the files, iClone, but I checked, 5 folders, containing 7gb, and 120 other folders and subfolder, containing 2gb, has 8gb, HP analyzer, has given a brief warning, with notification, in red, when I do a restart, and, also, I had 5 trojans in system32, original installation, HP, not supported, then I cleaned everything. But art gives me the idea, with the extension Terrabyte, I miss, some computer knowledge, and this is very nice of you all for help and advise. Thank you very much.

[claude2]

Also, my computer, and manufacturing origin of usa, and the extension, are very numerous, the official site. HP does not support other related facilities, such as Epson, and other marks, similar to Logitech. So I just, my HP hardware, including 2 printer, and also a TV monitor, integrate with opportunities, updates, directly from the HP website. I took a guarantee, aditional, for care provided, at a distance. But to be more careful with the computer, cleaning with a brush, the elements exposed to the ambient dust, or dirt, external computer. I also removed the food, to clean it several times. I do this one time every year, for avoiding the accumulation of dirt, and print a map, which is dirty, its often the cause of overheating. This is advice, which I recommend to all.

[Art]

Claude (others too),

Every 3 to 6 months, remove the side cover or case from your computer and blow out the dust with a can of compressed air if you can get it.
It is often the build up and accumulation of dust that causes a build up of heat on your computer's boards and components. Heat is bad...Cool
is good!! Replace cover.

Position computer where it can get good air flow, not crammed back in a corner between your desk and the wall. Again Heat=Bad...Cool=Good.

In most cases (no pun intended) you can add another FAN to increase air flow over those warm components. Some fans can fit in the front,
blank sections while others can be mounted in the rear (sometimes in an empty card slot). Some of these fans PUSH the air toward the rear and
some DRAW or PULL the air from the front to the rear. Any time you can help cool things down inside your computer, you will be doing it a favor.

Cooler computers actually run faster and perform better than hot or warm ones...FACT!

####################

Claude, Does iClone allow you to choose WHERE you save project files? If so, simply save them all to an External Hard Drive. Keep the main program
in your computer but use the External drive for storage of your projects, scenes, clothing, music, etc. I think things should work well for you that way.

Anyhow...all done for now. Good luck either way!!

[claude2]

Art, thank you very much, all the good technical advices. I have waited just a little, before, making the purchase, new extension. I regularly watch, the novelty, HP, and there, the computer, with, high, capacity, memory, and especially in graphics, I saw, too, a computer, 2 x, size, my computer, with several, abilities, I think it's a very big computer, I have, acquire, in order, do the 3D. In the post, Daz, I notice, the importance, in MB, of the program. Sure, that worked for, on a large program, the computer must have a high capacity. But it is always possible to return, a, iClone, for new animation. I have remained cautious, keep, control, very light, my creation. Thank you again, ART.